Procom IP, ISDN, E1 Industrial Application - Manual (Page 2)

All rights and changes reserved V1.2
Software Functionality
! Menu-guided programming in Windows operating system
! Saving of the functions and the call connection plan in the software
! Remote configuration or diagnosis and maintenance over modem interfaces
! Special alarm procedures programmable
Performance Characteristics
! Freely configurable functions under a menu-guided configuration programme in
Windows
! Storage of 4 configuration files (databanks) and operating system states
! Data storage on flash memory
! Remote programming, diagnosis and maintenance via modem interface
! Transmission of switching and signalling functions (remote control/remote
monitoring)
! Time to establish connection: < 200 ms
! Max. 100 configurable priority levels
! Call storage configurable up to 60 sec.
! Group/all calls: 16 per call station
! Permanent monitoring of the system modules
! Group malfunction signal with floating output
! Functions compliant with acoustic standards DIN EN/IEC or VDE
! Loudspeaker circuit monitoring and acknowledge signals
! Analogue radio switching over a/b and lines
! Keys with maintained contact, configurable as needed
! Explosion-protected call stations
-
-
- Up to 100
- LCPU e
Technical Data
! Modules with 19” slide-in technology 3 HE + 1 HE (inscription strip)
! Modular construction for up to 600 call stations and 20 kW
! Bus structure
! 48 lines of communication
! Digital amplifier with disaster switching
! Operating voltage range: 48 V DC (-10%) to 60 V DC (+15%)
! Climate class 3K4 according to DIN EN 60721-3-3/IEC 721-3-3 (+5 ° to +40 °C; 5 to
95% relative humidity)
! Integrated clock with automatic summer/winter changeover
! Up to 104 call stations can be switched in per system:
Wire saving technology over symmetric 2 or 4-wire,
for voice frequency and for data
Line switch-off, a/b for low frequency and lines
! A maximum of 17 digital 100 W amplifiers can be switched in per system
! Digital voice storage:
channels
quipped with up to 2 GB Compact Flash
or DSS1 with 4 MB flash memory chip
Software Functionality
Performance Characteristics
Technical Data
! Menu-guided programming in Windows operating system
! Saving of the functions and the call connection plan in the software
! Remote configuration or diagnosis and maintenance over modem interfaces
! Special alarm procedures programmable
! Freely configurable functions under a menu-guided configuration programme in
Windows
! Storage of 4 configuration files (databanks) and operating system states
! Data storage on flash memory
! Remote programming, diagnosis and maintenance via modem interface
! Transmission of switching and signalling functions (remote control/remote
monitoring)
! Time to establish connection: < 200 ms
! Max. 100 configurable priority levels
! Call storage configurable up to 60 sec.
! Group/all calls: 16 per call station
! Permanent monitoring of the system modules
! Group malfunction signal with floating output
! Functions compliant with acoustic standards DIN EN/IEC or VDE
! Loudspeaker circuit monitoring and acknowledge signals
! Analogue radio switching over a/b and lines
! Keys with maintained contact, configurable as needed
! Explosion-protected call stations
! Modules with 19” slide-in technology 3 HE + 1 HE (inscription strip)
! Modular construction for up to 600 call stations and 20 kW
! Bus structure
! 48 lines of communication
! Digital amplifier with disaster switching
! Operating voltage range: 48 V DC (-10%) to 60 V DC (+15%)
! Climate class 3K4 according to DIN EN 60721-3-3/IEC 721-3-3 (+5 ° to +40 °C; 5 to
95% relative humidity)
! Integrated clock with automatic summer/winter changeover
! Up to 104 call stations can be switched in per system:
- Wire saving technology over symmetric 2 or 4-wire,
for voice frequency and for data
- Line switch-off, a/b for low frequency and lines
! A maximum of 17 digital 100 W amplifiers can be switched in per system
! Digital voice storage:
- Up to 100 channels
- LCPU equipped with up to 2 GB Compact Flash
or DSS1 with 4 MB flash memory chip
DVS-21
Industrial Application
Hazard Alert System in compliance
with DIN VDE 0833-4
IP, ISDN, E1, 2 wire connection possible
International sales by:
ProCom
Professional Communication
& Service GmbH
Alfredstrasse 157
D-45131 Essen
www.procom-communication.de
Tel.: +49 (0) 201 860 670 - 90
Fax.: +49 (0) 201 860 670 - 98
[email protected]
Deutschland / Germany
National sales by:
RSR Datacom GmbH & Co. KG
Alfredstrasse 157
D-45131 Essen
www.rsr-datacom.de
Tel.: +49 (0) 201 860 670 - 0
Fax.: +49 (0) 201 860 670 - 40
[email protected]
A system that
speaks for itself.