AEG SKS51200S0 User Manual
Page 28
x
x
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
1
2
Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
44mm
4mm
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge
is 44 mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen fur-
niture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put the lower hinge cov-
er in position.
28 www.aeg.com