4 specifications – Crown Audio P.I.P.-FTE User Manual
Page 8
P.I.P.–FTE
Page 8
Fig. 3.6 Audio Wiring
–
+
–
+
BALANCED
SOURCE
UNBALANCED
SOURCE
4 Specifications
Signal to Noise:
Better than –85
dB (equivalent input noise) 20
Hz to 20 kHz.
Common Mode Rejection:
Bet-
ter than 60 dB at 1 kHz.
Crosstalk:
Crosstalk:
Crosstalk:
Crosstalk:
Crosstalk:
–82 dB at 1 kHz.
Input Impedance:
Nominally 20
kohm.
Recommended Source Imped-
ance:
10 kohm or less.
Maximum Input Level:
+20 dB
at 1 kHz.
Nominal Gain:
Unity.
Frequency Response:
±1 dB
from 20 Hz to 20 kHz with filters
set flat and horn equalization off.
High-pass (subsonic/bass) filter
has selectable –3 dB roll-off
points of 50, 100 or 300 Hz (see
Figure 4.2). Constant-directivity
horn equalization network has 3
dB rise at 3.2 kHz with 12.5 dB
peak at 24 kHz (see Figure 4.1).
Both these filters can be switched
off if desired.
A permanent RFI filter with a –3 dB
roll-off at 33 kHz also affects the
response.
Dimensions:
6
3
/
8
x 1
7
/
8
x 3
7
/
8
in. (16.2 x 4.8 x 9.8 cm).
Weight:
11 ounces (312 grams).
Note:
All specifications refer-
enced to a 0.775 V input signal.