Factory Direct Hardware Toto TEU3UN11#SS EcoPower - Manual (Page 2)

TOTO
EcoPower®
OVERRIDE BUTTON
LOCATION LOCATION
SENSOR
13-1/2"
Urinal
Frame
Supply
2-3/8”
3-3/4”
13-1/2”
Back Spud 3/4”
Solder joint
Finished wall
Back spud (ø1-5/16”)
*+/- 1/2”
Dimensions: Inch
Top of the Urinal
Location of the Left water
supply pipe 3/4” NPT
Location of the
Right water supply
pipe 3/4” NPT
4-3/4”
3-15/16”
3-15/16”
4-3/4”* 4-3/4”*
Opening in Wall:
3-15/16” x 3-15/16”
4-3/4”
3-3/8” 1-3/4”
of Supply
and sensor
(distance from Spud Hole to both
of Supply and Sensor)
TEU3UN
High-Effi ciency Urinal EcoPower ® Flushometer Valve, 1/8 gpf
#SS-00625, v.01
Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Check your local plumbing code for details.
• Warranty Three Year Warranty
• Material Bronze casting
• Power Supply Hydro-Power Charge
• Water Supply 3/4" NPT
• Detection time Factory setting at six (6)
seconds minimum
• Detection range Self-adjusting to environment
• Discharge quantity Preset to 1/8 gpf / 0.47 lpf
• Operating temperature 32°-104°F (0°-40°C)
• Supply water pressure 15 psi - 125 psi*
• Trap seal protection
Automatically fl ushes once
after twelve (12) hours
of non-use
INSTALLATION NOTES
The recommended installation for the urinal
fl ushometer valve is to have a 7" (178mm) minimum
space in wall. Also a minimum 12” x 12” access
panel or walk-in chase is required for service and
maintainence.
DIAGRAM RECOMMENDED INSTALLATION