Factory Direct Hardware Toto TEU2UN11#SS - Manual (Page 2)

Dimensions: Inch
Urinal
Supply
2-3/8”
3-3/4”
13-1/2”
Back Spud 3/4”
Solder joint
Finished wall
OVERRIDE BUTT
ON
LOCA
TION
SENSOR LOCA
TION
Back spud (ø1-5/16”)
13-1/2”
4-3/4”*
Opening in wall
of Supply
and sensor
(distance from Spud Hole to both
of Supply and Sensor)
Opening in wall
Top of the Urinal
1
1
-15/16”
5-1/8”
3-13/16”
*+/- 1/2”
13-1/2”
TEU2UN
High-Effi ciency Urinal EcoPower ® Flushometer Valve, 1/8 gpf
#SS-00624, v.01
Printed in U.S.A. | © TOTO USA 10/11 | Printed on recycled paper ♻
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
These dimensions and specifi cations are subject to change without notice
SPECIFICATIONS
These specifi cations are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fi xtures.
Check your local plumbing code for details.
• Warranty Three Year Warranty
• Material Bronze casting
• Power Supply Hydro-Power Charge
• Water Supply 3/4" NPT
• Detection time Factory setting at six (6)
seconds minimum
• Detection range Self-adjusting to environment
• Discharge quantity Preset to 1/8 gpf / 0.47 lpf
• Operating temperature 32°-104°F (0°-40°C)
• Supply water pressure 15 psi - 125 psi*
• Trap seal protection
Automatically fl ushes once
after twelve (12) hours of
non-use
INSTALLATION NOTES
The recommended installation for the urinal
fl ushometer valve is to have a 7" (178mm) minimum
space in wall.
DIAGRAM RECOMMENDED INSTALLATION