Factory Direct Hardware Delta T13H252 - Manual (Page 2)

MultiChoice ™ Universal
Pressure Balance Tub and Shower
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-T13H1 Rev. C
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Pressure Balance Handle ADA Compliant
and meet Handicapped Accessibility
Standard ASME A117.1 of less
than 5 lbs. operating force.
• Pressure Balance Valve ASSE 1016
• Handshower back flow protection provided by
two integral certified check valves in series,
which operate independently,
ASME A112.18.3
and ASME A112.18.1 / CSA B125.1.
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
2.5
3
3.5
2
1.5
1
.5
0 0
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
10
11
12
13
Shower Outlets
No. 2 (RP43381) No. 1 (060890A)
Line Pressure (psig)
FLOW
(l /min.)
FLOW
(USGPM)
No. 8 (RP46384)
No. 3, 5 & 6 (061048A, 061049A, 061011A)
P/B VALVE INLETS :
1/2'' Universal inlets accept 1/2" copper,
1/2" iron pipe, PEX or CPVC adaptors
1/2" Male thread inlets/outlets
Note: Measurements may vary ± 6mm (0.25'')
Shower Outlet Flowrates
Tub Filler Flowrates FRONT VIEW SIDE VIEW
R10000-UNWS Rough-In
with
T13H132 Trim
FLOWRATE vs PRESSURE
6.5
7
7.5
8
5.5
6
5
4
4.5
3.5
3 11.5
13
20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(l/min.)
FLOW
(USGPM)
14.5
16
17.5
19
20.5
22
23.5
25
26.5
28
29.5
TECK ®
COMMERCIAL
117 mm
(4.6")
910 mm
(36.0")
OPTIONAL
910 mm
(36.0")
OPTIONAL
TO FLOOR
178 mm
(7.0")
51 mm
(2.0")
METAL LEVER
HANDLE
STOPS
HOT COLD
INLETS
C L VALVE
BODY
70 mm
(2.75")
152 mm
(6.0")