beautypg.com

Factory Direct Hardware Delta 28C6944-R3 User Manual

Sink faucet wallmount, Specification, Complies with

background image

Sink Faucet Wallmount

8" Wallmount WITH Integral Check Stops - CER-
TECK®

Model No: 28C6944-R3

SPECIFICATION:

203 mm (8") centers cast brass wallmount sink faucet

Centers adjustable from 7.75" to 8.25" unless AC option selected

Two handle

Polished chrome plated finish

WITH integral check stops

CER-TECK® 1/4 turn ceramic disk cartridge

Spout: R3 - Gooseneck spout- 6.0" radius-6.7" height(unmounted)-
Standard rigid/swivel field installation unless LS Limited swing option
selected-Vandal resistant .090" wall thickness

Outlet#: 4 - Standard 1.5 USGPM (5.7 L/Min) Flow Control Aerator

Handle#: 4 - 102 mm (4") Blade Handles- ADA Compliant-Sanitary Hoods-
Metal-Color indexed-Vandal resistant screws

COMPLIES WITH:

CSA certified.

Complies to ASME Standard A112.18.1.

IAPMO listed

Verified to <0.25% Pb average wetted surface regulations

(Contact Delta Representative for State and/or Local Approvals)

102 mm (4") Blade Handle ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs operating force

(Dimensional drawing on following page)

Not Available

OPERATION:

NOTES:

CA/VT Compliance:

This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.

The Product Numbers have NOT changed.

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced November 02, 2011.

- 1.0.27915

Page of

1

2

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030