beautypg.com

Factory Direct Hardware Hansgrohe 27458 ShowerPower User Manual

Page 2

background image

2

Wall Outlet with Vacuum Breaker 27458XX2

Wall Outlet 27454XX2

Installation Considerations

This unit requires a 1/2" male threaded

nipple, extending 5/8" outside the

surface of the finished wall.

Model 27458XX2 incorporates an

atmospheric vacuum breaker. It is listed

by Underwriters Laboratories.

Model 27454XX2 does not incorporate

any type of backflow prevention. If

required, use Hansgrohe external

vacuum breaker 06510XX0.

Installation Instructions

Wrap the threads on the nipple with several

layers of Teflon tape.

Seal the wall around the nipple with a

waterproof sealant.

Push the black gasket over the nipple and

firmly against the wall.

Screw the elbow to the nipple.

Install the decorative cover over the nipple.

Press it firmly against the gasket - it should

snap into place.

Note on 27458XX2: It is normal for a few drops of water to appear in the vacuum

breaker vent holes when the water is first turned on, and again when it is turned off.