beautypg.com

Factory Direct Hardware Hansgrohe 27831 Axor Citterio User Manual

Page 5

background image

5

Install the anchors. Seal the wall around the anchors with

waterproof sealant.

Screw the support elements to the wall with the screws.

Note: the gold deco-rings shown in the diagram are

included only with Carlton model 27835090 (chrome

with gold accents). They are not used with other models.

Position the wallbar over the support elements. Press the

bar firmly into place.

Deco ring

Wallbar removal:

Insert a small tool, such as an Allen wrench, through the hole

in each escutcheon. Push upward against the retaining pin

very firmly (1). Pull “out” on the end of the wallbar (2).