beautypg.com

Factory Direct Hardware Hansgrohe 18450001 Axor Massaud User Manual

Page 4

background image

4

Installation

Turn the water off at the main before beginning.

Cut the plaster shield on the rough valve so that it is /8”

above the surface of the finished floor.

Remove the flush insert. Do not discard the screws.

Position the tub filler over the rough. Turn it so that the

spout faces in the correct direction.

Make sure that the unit is plumb. Install the three screws

included with the tub filler and the three screws reserved

from the flush insert. Tighten the screws with an 8 mm

Allen wrench.