Factory Direct Hardware Delta 27T643 - Manual (Page 2)

Single Pantry Faucet
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
DSP–27T
Refer to www.specselectonline.com for individual models. Note: Use this page front and back as a product submittal sheet.
See Page 9.C.1 for
additional optional
spouts.
GOOSENECK SPOUT ASSEMBLIES
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R2) for outlets #2, 3, 4, 5 114 4.5 104 4.1 170 6.7
Gooseneck–Standard (R2) for outlet #7 114 4.5 97 3.8 178 7.0
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Lever Blade Handle No. 3
ADA Compliant and meets
Handicapped Accessibility
Standard ASME A117.1 of less than
5 lbs. operating force.
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
SWING SPOUTS
FRONT VIEW
2.5
2
1.5
1
.5
0 0
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(l/min.)
FLOW
(USGPM)
Spout Outl ets
No. 3 & 4 Aerator No. 2 Laminar Flow Outlet
No. 7 Flow Control No. 5 Low Flow Outlet
INLETS - 1/2'' MIP/Coupling Nuts
Note: Measurements may vary ± 6mm (0.25'')
Outlet Flowrates
25mm
(1.0") DIA.
32mm
(1.25") MAX.
70mm
(2.75")
131mm
(5.2")
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER
OR 1/2-14 NPSM COUPLING NUT (SUPPLIED)
(1.60")
41mm
(1.88")
48mm
A
L
C
79mm
(3.1")
D
OUTLET “D”
NO. mm in.
2 18 0.69
3 18 0.69
4 17 0.67
5 18 0.69
Spout “A” “C” “L”
No. SPOUT TYPE mm in. mm in. mm in.
1 6" Wallform Spout (S1) 165 6.5 15 0.6 102 4
3 6" Tubular Spout (S3) 140 5.5 38 1.5 107 4.2
See Page 9.C.2 for
additional optional
spouts.
SWING SPOUT ASSEMBLIES
(1.60")
41mm
(1.88")
48mm
A
L
C
D
89mm
(3.52")
(1.60")
41mm
(1.88")
48mm
A
L
C
89mm
(3.52")
GOOSENECK SPOUTS
Outlets #2, 3, 4, 5 Outlet #7