Factory Direct Hardware Hansgrohe 27418001 Raindance - Manual (Page 2)

2
28420XX1
27418XX1
Installation Considerations:
The 27418XX1 shower arm requires a 1/2"
male threaded nipple, extending 5/8"
outside the finished surface of the ceiling.
The 27410XX1 shower arm requires 1/2"
male threaded nipple, extending 5/8" outside
the surface of the finished wall. The wall
must be reinforced at the mounting
point.
Hansgrohe recommends that the Raindance Air
Royale showerhead be installed with the
Ecostat thermostatic mixing valve.
Do not install this showerhead with a pressure
balancing valve.
A 12 mm allen wrench (not included) is useful
for installing the ceiling mount arm. 12 mm
allen wrenches are available at hardware and
auto parts stores.
Suggested Layouts
Two-feature installation with Ecostat thermostatic
mixer and Trio diverter.
Three-function shower with Ecostat thermostatic
mixer, 3/4" volume control, and Quattro diverter.
27410XX1
area for required wall reinforcement
gpm
From • the function is guaranteed.