Factory Direct Hardware Hansgrohe 04076LF Allegro E User Manual
Page 2
Installation considerations
For best results, Hansgrohe
recommends that this unit be
installed by a licensed, profes-
sional plumber.
Please read over these instruc-
tions thoroughly before begin-
ning installation. Make sure that
you have all tools and supplies
needed to complete the instal-
lation.
This faucet should be protected
from freezing temperatures.
Protection against back siphon-
age provided by check valve.
•
•
•
•
Technical information
Recommended water pressure
14.7 - 7.5 psi
Max. water pressure
147 psi
Recommended hot water temp.
120� - 140� F*
Max. hot water temp
165�F*
Hole size in mounting surface
1 3/8"
Max. mounting surface depth
3/8"
Flow rate
. gpm
Cartridge with high temperature limit stop
3/8" supply hoses
*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.
Allegro E Lowrider Kitchen Faucet
04076XX0
Do not twist or kink the supply hoses!
English