Factory Direct Hardware Delta 710LF-HDF - Manual (Page 2)

Approvals:
• CSA certified
• Complies to ASME A112.18.1
• ADA Compliant and meets
Handicapped Accessibility
Standard ASME A117.1 of less than
5 lbs. handle operating force.
• IAPMO listed
• Control Box Option 6 & 7 Mechanical
Mixing Valve CSA certified
• Control Box Option 8 & 9 Thermostatic
Mixing Valve CSA certified and meets
ASSE 1016, 1017, 1070
(Contact Delta Representative for State
and/or Local Approvals.)
OPERATION:
(Optional Adjustments)
• Water flows when sensor is activated.
• Water flow stops at the selected run-on time
after user removes hands from sensing zone.
Run-on time selections are 0 to 8 seconds or
1 to 8 minutes for scrub-up applications.
Factory set to 0 seconds.
• Blocking time between uses has selectable
range of 1 to 8 seconds. Factory set to
1 second.
• Adjustable response time.
• Auto shut-off feature.
• Optional metered program mode with
selection of 7 to 240 seconds of continuous
operation.
• Adjustable sensing distance 76 to 381mm
(3" to 15") factory set to 254mm (10") (+/– 1.0”)
3/8" Compression
Connection
Watertight Connection
36" Long
32mm (1.25")
Dia. Hole
Required
58mm
(2.28")
Integral
Sensor
62mm
(2.46")
38mm
(1.5")
Max. Deck
Thickness 59mm
(2.31")
L
D
A
C
38mm
(1.5")
Max. Deck
Thickness
59mm
(2.31")
62mm
(2.46")
L
C
A
with Outlet #2 and 3 with Outlet #7 and 8
#4 - 102mm (4.0")
#5 - 203mm (8.0")
38mm
(1.5")
Max. Deck
Thickness 32mm (1.25") Dia.
3 Holes Required
Watertight Connector
36" Long
3/8" Compression
Connection
#4 - 191mm (7.5")
#5 - 282mm (11.1")
Integral
Sensor
A
C
D
L
78mm
(3.08")
63.5mm
(2.50")
78mm
(3.08")
63.5mm
(2.50")
L
A
C
with Outlet #7 and 8
OUTLET “D”
NO. mm in.
2 18 0.69
3 18 0.69
Gooseneck
Spout
Sensor
Watertight
Connector
Flexible, Sensor
Cord Conduit
SUPPLIED:
3/8" MIP Outlet from Box
3/8" Compression Joint at Spout
BALANCE BY OTHERS
257mm (10.13")
Control Box
Inlet - 1/2" Copper
(Tempered Water
By Others)
305mm (12")
77mm (3.0")
102mm (4")
Stainless Steel
Cover Plate
Coverplate
355mm
(14") max.
with Outlet #2 and 3
Electronic Basin/Sink Faucet
3000T & 3001T Series Adjustable Program
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-3000T Rev. F
3000T & 3001T ELECTRONIC FAUCET OPTIONAL ACCESSORIES:
✔
TRANSFORMERS:
060704A 110 to 24VAC Class II 20VA (Up to 5 Electronic Valves)
060771A 110 to 24VAC Class II 40VA (Up to 10 Electronic Valves)
060772A 110 to 24VAC Class II 100VA (Up to 25 Electronic Valves)
✔
CORDS:
060690A 36" Cable Extension
GOOSENECK SPOUT ASSEMBLIES
FLOWRATE vs PRESSURE
2.5
2
1.5
1
.5
0 0
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(l/min.)
FLOW
(USGPM)
Spout Outlets
No. 3 Aerator
No. 2 Laminar Flow Outlet
No. 7 Flow Control
No. 8 Flow Outlet
Outlet Flowrates
Note: Measurements may vary ± 6mm (0.25'')
“A” “C” “L”
Spout/Outlet mm in. mm in. mm in.
Gooseneck-Standard (R5)
for Outlet #2, 3
152 6 124 4.9 188 7.4
Gooseneck-Standard (R5)
for Outlet #7 and 8
152 6 117 4.6 196 7.7
3000T3421A
Typical
Installation
Refer to www.specselect.com for individual models.
Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
GOOSENECK
SPOUT #3
3 POSITION SWITCH
Add suffix “-KS” to
Product Number for
Keyed Switch
See DSP-ELACC Rev. A for
detailed specification
GOOSENECK
SPOUT
#4 & #5
TECK ®
COMMERCIAL
HYDRO POWER ™
■ Add suffix “-HP” to Product Number for Hydro Power ™ .
See DSP-HP for detailed specification. Available on
Battery Powered #0 Control Box and #2, 3, 7 outlets only.
HARDWIRE WITH BATTERY
BACKUP
■ Add suffix “-BB” to Product Number. See DSP-BB for
detailed specification.