Factory Direct Hardware Delta 81T221-6 User Manual
Teck, Exposed teck, Flush valve
Exposed Teck
®
Flush Valve
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP-81T201
Refer to www.specselect.com for individual models.
Note: Use this page as a product submittal sheet.
Engineer/Architect Approval
Model Specified:
Approval:
Date:
Note: Measurements may vary ± 6mm (0.25'')
Specification: (example)
(FOR 1-1/2'' TOP INLET CLOSET FIXTURE)
• Quiet action, TECK
®
exposed diaphragm flush valve
• Chloramine resistant diaphragm
• Forged brass diaphragm retainer
• Renewable seat
• Polished chrome plated finish
• External water conserving flush volume adjustment,
(except -48 and -6 models) factory set at 60 PSI to 6 litre (1.6 US gal.)
• Vandal resistant cover screw
• Metal “non hold open” handle
• 1" FIP/copper sweat inlet adaptor angle check stop with
protecting cap
• Adjustable 121mm (4-3/4'') plus or minus 11mm (7/16'') inlet/valve
outlet centers
• Vacuum breaker
• Cover tube and SIS wall flange, spud flange and concealed spud nut
WITH 292mm (11-1/2'') LENGTH:
❏
81T201
As above
❏
81T201-1
Same as 81T201, but with trap seal primer tee
❏
81T201-5
Same as 81T201, but with center cover bumper
❏
81T201-6
Same as 81T201, but Not Field Adjustable
❏
81T201-48
Same as 81T201, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
❏
81T201-56
Same as 81T201-5, but Not Field Adjustable
❏
81T201-548
Same as 81T201-5, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
With 610mm (24'') LENGTH
❏
81T221
As above
❏
81T221-1
Same as 81T221 but with trap seal primer tee
❏
81T221-6
Same as 81T221, but Not Field Adjustable
❏
81T221-48
Same as 81T221, but factory set at 60 PSI to 4.8 litre
(1.27 US gal.), Not Field Adjustable
Approvals:
• CSA certified
• Complies to ASSE 1037
• ADA compliant and meets
Handicapped Accessibility
Standard ASME A117.1 of less
than 5 lbs. operating force.
• IAPMO Listed
(Contact Delta Representative for State
and/or Local Approvals.)
81T201
54mm
(2.13”) MIN.
Note: For high and low pressure applications, please see page
FEA-81T High Water Pressure note for more details.
Verify flow requirements with bowl manufacturer.
-1 OPTION TRAP SEAL PRIMER TEE
DETERGENT/DISINFECTANT
3/8" O.D. Copper Tube
(NOT SUPPLIED)
TO TRAP
SEAL
292mm (11.5”) for 81T201
610mm (24”) for 81T221
121mm (4.75”)
TECK
®
COMMERCIAL