AEG A52800GSW0 - Manual (Page 31)

9.5 Levelling
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appli-
ance loosen or tighten the two adjusta-
ble front feet.
9.6 Door reversibility
1
2
3
8
6
7
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power sock-
et.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Remove the plinth (1).
• Remove the cap (2) and position it on
the opposite side.
• Unscrew the hinge (3) and remove the
door.
• Unscrew the lower pin and the washers
(3)
• Position the pin and the washers (6) on
the opposite side (7).
• Unscrew the other hinge (5)
5
4
• Unscrew the upper pin (4) and screw it
on the opposite side. (5)
• Refit the door.
• Refit and screw both lower hinges.
• Refit the plinth (8).
ENGLISH
31