Factory Direct Hardware Hansgrohe 32310 - Manual (Page 2)

2
Metris Widespread Lavatory Faucet 31063XX1
Metris Widespread Bidet Faucet 31263XX1
Talis S Widespread Lavatory Faucet 32310XX1
Focus Widespread Lavatory Faucet 31730XX1
31063XX1 31263XX1
Product Specification
Requires 1/2” supply lines (not included)
Max. mounting surface thickness 1 1/8”
Hole sizes in mounting surface
Spout 1 3/8”
Valves 1 1/4”
Max. incoming water pressure 145 PSI
Recommended incoming water pressure 22 - 72 PSI
Max. incoming hot water temp. 176 o F*
Recommended incoming hot water temp. 120 o - 140 o F*
Max. flow rate 2.2 gpm
The bidet faucet is not suitable for use on vertical spray bidets.
This faucet may be used with a continuous flow water heater if the flow pressure is at least 20 PSI.
For best results, Hansgrohe recommends that this faucet be installed by a licensed, professional plumber.
*Please know and follow all applicable local codes when setting the temperature on the water heater. In Massachusetts, the water heater may be
set no higher than 112 o F.