Factory Direct Hardware Delta 27C2934-R7 - Manual (Page 2)

Below Deckmount Sink Faucets
8" Centers
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–27C/T1 & 2 Rev. A
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Spout “A” “C” “L”
No. SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
See Page 9.C.2 for additional optional spouts.
SWING SPOUT ASSEMBLIES
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Lever Blade Handles No. 2, 3, 4, and 5,
ADA Compliant and meet Handicapped
Accessibility Standard ASME A117.1
of less than 5 lbs. operating force.
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
SWING SPOUT
SPRAY
FRONT VIEW
2.5
2
1.5
1
.5
0 0
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Spout Outlets
No. 3 & 4 Aerator No. 2 Laminar Flow Outlet
Lin e Pressu re (ps ig)
FLOW
(l/min.)
FLOW
(USGPM)
No. 7 Flow Control
Outlet Flowrates
OUTLET “D”
NO. mm in.
2 18 0.69
3 18 0.69
4 17 0.67
51mm
(2.0")
97mm
(3.8")
102mm
(4.0")
89mm
(3.5")
32mm
(1.25") MIN.
**3 HOLES
* 203mm
(8.0")
102mm
(4.0")
27mm
(1.06") MAX
44mm
(1.75")
A
L
C
25mm
(1.0")
D
25mm
(1.0") MIN.
DIA. HOLE
(2.0")
51mm
(Extension Kit Available
for up to 1 1 / 4 '' Thick Decks)
L
C
26mm
(1.01")
(1.75")
44mm
A
Outlet #7 Outlets #2, 3, 4
(1.75")
44mm
C
L
D
26mm
(1.01")
A
Note: Measurements may vary ± 6mm (0.25'') INLETS - 1/2'' MIP/Coupling Nuts
GOOSENECK SPOUT ASSEMBLIES
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlets #7 152 6 117 4.6 152 6.0
See Page 9.C.1 for additional optional spouts.
GOOSENECK SPOUT
63mm
(2.5")
①
3
4
1
76mm
(3.0")
53mm
(2.1")
96mm
(3.77")
73mm
(2.9")
102mm
(4.0")
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR
1/2-14 NPSM COUPLING NUT (SUPPLIED)
LIMITED SWING
GOOSENECK
Add suffix “- LS” to Product
Number for 120º Limited Swing
2
5
118mm
(4.7")
152mm
(6.0")
135mm
(5.3")
HANDLE TEMPERATURE
INDICATORS
Add suffix “-TI” to Product Number
for handle temperature indicators
“H” (red), “C” (blue).
Available on handle options 2, 3,
or 4 only.