ADATA SP600 User Manual
Page 6
ADATA SSD Firmware Update (Field Updater) User Guide
6
Step 4-
When the SSD has been detected and displayed, select the drive(s) to be
updated and then click
“Update Firmware” to start the update.
Note: If you want to update more than one drive at a time,
make sure the
Signature field in the Field Updater has the same last five digits for each SSD.
Click
”Update Firmware” in
the lower left corner to start
update.
When Rescan is finished, you
will see here all current SSDs.
Check to upgrade the firmware
of this SSD