Neutrik NPPA-TT-E56 User Manual
Page 10
Page 10 of 12
NPPA-TT-E56 Instruction Manual
To write on the paper you have to unscrew one of the outer fixing screws of the front panel.
Then pull out the side-stop, the transparent foil and the paper strip itself.
After marking is done assemble the parts in reversed sequence.
Remove labeling strip
Side Stop
NOTE: For easy and perfect marking you can use our designation software “PatchLabel”
which is available on our web site
www.neutrik.com
free of charge.
Print-Out software “Patch Label”