Neutrik Loudspeaker Connectors - Manual (Page 5)

71
12 mm [0.5"]
25 mm [1.0"]
www.neutrik.com
This second generation of speakON connectors features
higher current rating for the operation of high power speak-
ers and amplifiers carrying more than 1`000 Watts. Only 3
parts make it fast and easy to assemble with a more reliable performance. Our unique design makes it possible to change
easily and quickly from a straight connector to the right-angle
version, even without disconnecting the cable.
Prepare cable as shown. HINT:
For easy wiring especially
of thick cables, first screw
on the inner contacts 1+
and 2+ and afterwards the
outer contacts 1- and 2- !
Use screwdriver Pozidriv #1 only.
D e s i g n C r i t e r i a
A s s e m b l y
s p e a k O N s p e a k O N
1 Progressive clamping as wire is pushed for-
ward
2 Acts as screw locking device due to side forces
3 Large combi drive - M4 screw
4 Wire size 1.5 - 4 mm
2 (AWG 12)
for 6 mm 2 (AWG 10) remove screw & solder
5 Pull out force > 300 N @ 80 cNm
6 Gas tight connection
Improved SPX-Series screw contacts! ( Wire position after assembly)
1 Easy and extremely precise locking system
"Quick Lock"
2 Improved grip on latch
3 1 piece strain relief, chuck for 7 to 14.5 mm
cable O.D., with accessory NLRR 5-8 mm
4 Color coding possible
5 Integrated design guaranties
"Made by NEUTRIK
® "
1
3 4 5
2
6
1
2
3
4
5
a