Neutrik NPPA-TT-SD50 - Manual (Page 14)

Page 14 of 14
NPPA-TT-SD50 Instruction Manual
10. Ordering Information
10.1 Standard supply
The compact Neutrik "Easy Patch” NPPA-TT-SD50 consists of:
• Black coated steel casing with aluminum fittings
• 2 x 48 highly integrated NJ3TTA jacks with gold plated double contacts and specially
designed normalling mechanism (standard: half normalled bottom row)
• Integrated internal pre-wiring with selectable flexible grounding system
• 4 x 50 pin D-subminiature terminals
• 1 built–in cable retention bar
• Spare normalling configuration bars
48 Normal 1: “short”, bridges 5 contacts
96 Normal 2: “medium”, bridges 6 contacts
48 Normal 3: “long” , bridges 7 contacts
• 1 Disassembling pliers
• 1 Instruction Manual
10.2 Options and Accessories
Order Information for Pre-configured jack pairs and Accessories:
• NJ3TTA-4-HNB
blocks of 2 channels; half normalled bottom row
cover identification color: clear
• NJ3TTA-4-HNT blocks of 2 channels; half normalled top row
cover identification color: yellow
• NJ3TTA-4-FN blocks of 2 channels; full normalled
cover identification colour: green
• NJ3TTA-4-P blocks of 2 channels; parallel
cover identification color: red
• NJ3TTA-4-I blocks of 2 channels; isolated
cover identification color: orange
• NPPA-S
optional Strain relief bar
• NKTT0x
Patch cable (available in different lengths and colours)