Neutrik opticalCON Coupler - Manual (Page 4)

Draft. Nr.: BDA 358 Update: 01.02.2013 / 3102M2131 I I
Data subject to change without prior notice. 2013 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark. © ® ®
www.neutrik.com www.neutrik.com
R
NEUTRIK AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
NEUTRIK T: F:
T: F:
( ) T: F:
T: F:
LI
USA
UK
DE / NL / AT/DK +423 / 237 24 24 +423 / 232 53 93
+1 704 / 972 3050 +1 704 / 438 9202
+44 1983 / 811 441 +44 1983 / 811 439
+49 8131 / 280 890 +49 8131 / 280 830 Vertriebs GmbH
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK FR
JP
HK T: F:
T: F:
Ltd. T: F:
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052 Hong Kong
- 4 -
MAINTENANCE I opticalCON Coupler
R
5.
6.
7.
8.
9.
10.
NEVER REUSE A WIPE
Fold lint free wipe into a square and fix it with
the magnet.
Moisten one section of the wipe with one drop
of cleaning fluid. Be sure that a portion of the
wipe remains dry.
Wipe slightly the ferrule tip in the
moistened portion of the wipe. Immediately
repeat this wiping action on the dry section as
the wipe to remove any residual alcohol.
Dispose the wipe. .
Repeat the process if required.
After cleaning procedure plug in the LC
(MTP ferrule) on the rear side of the chassis.
Attach the housing and secure chassis by
tighten the screws.
cleaning fluid
®
cleaning
fluid