3B Scientific SW Stand Equipment Set - Manual

3B SCIENTIFIC® PHYSICS
1
SW Set – Stand Equipment 1012849
Instruction manual
09/13 TL/ALF
1 Double clamp
2 SW cross bar
3 Base
plate
4 Stand rod with external thread
5 Stand rod with internal and external thread
1. Description
Stand equipment for simple, easily understood
and stable experiment set-ups, e.g. for investi-
gating mechanical oscillations and waves using
sensors from the SW sensors sets, 230 V, 50/60
Hz (1012850) or 115 V, 50/60 Hz (1012851).
Includes the SW base plate as a secure base
that will not tip, with three specially threaded
sockets for attaching stand rods with external
and internal threads in such a way that they
cannot lean over and with the capability of being
extended using a second rod with external
thread. Two double clamps are provided for
attaching the SW cross bar or additional stand
rods of 10 mm diameter.
The SW cross bar acts as a multi-functional
mounting piece to be placed between rods
screwed into the base plate and designed for
setting up a Wilberforce pendulum, a physical
pendulum or a string pendulum in conjunction
with the dynamic force sensors from the SW
sensors set.