AEG S32500KSS1 - Manual (Page 28)

9.2 Rear spacers
45°
45°
A
1
2
2
In the bag with the documentation,
there are two spacers which must be fit-
ted as shown in the figure.
1. Fit the spacers into the holes. Make
sure that the arrow (A) is positioned
as shown in the picture
2. Turn counter-clockwise the spacers
through 45° until they lock into
place.
9.3 Levelling
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
28 www.aeg.com