Zanussi ZES3921IBA - Manual (Page 24)

Product description
Cooking surface layout
1
2
3
4
180
mm
145
mm
1
Rear cooking zone 1700 W
2 Front cooking zone 1200 W
3
Power indicator
4 Control knobs
Electric cooking zones control knobs
Symbol Function
0 off position
Symbol Function
1 minimum heat
6 maximum heat
Daily use
Warning! Refer to the Safety chapters.
To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
When a cooking zone operates, it hums
for a short time. This is typical of all ceram-
ic glass cooking zones and does not show that
the appliance operates incorrectly.
Helpful hints and tips
Warning! Refer to the Safety chapters.
Cookware
• The bottom of the cookware must be as
thick and flat as possible.
• Cookware made of enamelled steel and
with aluminium or copper bottoms can
cause discoloration on glass ceramic
surface.
Warning! Make sure that pots do not
cover the control zone.
24
www.zanussi.com