Airbagit Tow Kit 2003-2012 Dodge Ram 2500_3500 4 Link - Manual (Page 4)

12. The upper bag mount attaches to the factory bump stop mounting location. Install
the bag mount with the supplied flat socket head cap screws and then mark and
drill the 3 remaining mounting holes in the frame and install and tighten the bolts
13. Install the rear upper shock relocator brackets on the frame by aligning the hole in
the bottom of the bracket with the large vertical hole in the frame. The driver’s side
shock relocator is integrated into the frame. Mark and drill the remaining mounting
holes and install and tighten the bolts
14. Remove factory differential cover and drain fluid
15. Mount differential pan hard bracket between the differential cover and differential
housing with link mount provisions towards the passenger side of the truck
16. Re fill rear axle with the manufacturer’s recommended fluid type and volume
17. Install the pan hard bar with the bushing end on the frame and the heim joint at the
axle