ZMODO ZH-KA0A02-W Mini NVR System - Quick Installation Guide User Manual

Connecting to your camera on pc, Quick installation guide, First method: remote connection by adding nvr’s id

Quick Installation Guide

Zmodo MINI NVR/IP Cameras System

GETTING STARTED

CONNECTING TO YOUR CAMERA ON iOS AND ANDROID

Download and install Zmodo Zsight

software from the App store iPhone)

or Google play (Android) or download

from website:

www.zmodo.com/support-software/

Note:
If your phone can not scan QR code, please refer to Zviewer for phone (Android and iOS) Website:

www.zmodo.com/support-software/

Package Includes

(1) 4 Channel MINI Wireless NVR
(2) IP Security Cameras
(2) 12V 1.5A Power Supply
(1) 12V 3A Power Supply
(1) 3ft Network Cable
(1) IR Remote Control & Mouse
(1) Quick Installation Guide
(2) User Manual

Note:

1. Please make sure that router’s UPNP is enabled before connecting camera.

2. Please make sure that your mobile device is connected to the same network as the NVR.

3. Please make sure that IP Cameras, NVR and router are in the same network. IP Cameras’ default IP

addresses are 192.168.1.151(Wireless), 192.168.1.153(Wireless). NVR’s default IP address is

192.168.1.10, so router’s IP address must be set 192.168.1.1. Here we have an Actiontec router as an

example:

iPhone

Android

Download (Website: http://www.zmodo.com/support-software/)
List Includes:
Zsight-iOS(Software)
Zsight-Android (Software)
Zviewer-Windows (Software)
Zviewer-iOS(Software)
Zviewer-Android(Software)
Zmdplayer(Software)
IPCSearch(Software)

System Requirements: iPhone: iPhone v4.3 up and a valid iTunes account. Android: Android v2.3 up.

Click [Device by ID], enter ID number, and click [Next].

9999998001

First Method: Remote connection by adding NVR’s ID

Find "Setting", and click [Device Management].

Right click in the blank area on the right, then select [Add].

Launch ZViewer on your PC, enter “User Name” (Default:

admin) and “Password” (Default: 111111), then click [Login].

CONNECTING TO YOUR CAMERA ON PC

Note

NVR and Internet must be connected

Install the ZViewer windows software from

www.zmodo.com/support-software/

. There are two ways to connect your camera on PC.

Tap the icon from the

home screen to open

Zmodo Zsight, and click

[Add], this will take you to

the “Add Device” section.

Tap the image of QR code, then

scan the QR code area on the

NVR with your phone.

Enter the default

password “111111”,

and click [Save].

Click the device from the

[List] on your mobile device,

and you will be able to see

the video stream.

Power Supply

LAN

VGA

CAT

Wireless Router

CAT

/ Wireless

Monitor

Power Adapter