Prokit's Industries MT-4011 - Manual (Page 3)

*** Name of parts
1. LCD display
2. Power button
3. Function key
4. Input terminal
5. Battery cover
*** Operation
1. Power ON/OFF
Press the power button to turn the power on or power off.
The meter will auto power off after 20 minutes if the meter no
operation or no PC communication.
2. Press”℃/℉“once, unit will be converting from ℃ to ℉ or ℉
to ℃.
3. Press “HOLD” to enter the Hold mode “H” will display on the
LCD. Press “HOLD” again to exit the Hold mode.
Press “HOLD” for 2 seconds then press “HOLD” again for exit
the auto power off mode. “A” will disappear on LCD
Press “HOLD” for two seconds then press “HOLD” again for
enters auto power off mode. “A” will display on LCD.
4. MAX/MIN: for read maximum or minimum record.
5. REL: The minus relative readout function
3