beautypg.com

Safety information, Safety symbols, Maintenance – Prokit's Industries 303-150NCS User Manual

Page 2

background image

SAFETY INFORMATION

This multimeter has been designed according to IEC 1010
concerning electronic measuring instruments with an overvoltage
category (CAT II) and pollution . Follow all safety and operating
instructions to ensure that the meter is used safely and is kept in
good operating condition. Full compliance with safety standards
can be guaranteed only with test leads supplied. If necessary, they
must be replaced with the type specified in this manual.

SAFETY SYMBOLS

Important safety information, refer to the operating manual.

Dangerous voltage may be present.

Earth ground.

Double insulation (Protection class II).

Fuse must be replaced with rating specified in the manual.

MAINTENANCE

• Before opening the case, always disconnect test leads from all

energized circuits.

• For continue protection against fire; replace fuse only with the

specified voltage and current ratings: F 200mA/250V(Quick
Acting)

• Never use the meter unless the back cover is in place and

fastened completely.

• Do not use abrasives or solvents on the meter. To clean it using

a damp cloth and mild detergent only.

200mA/250V