Prokit's Industries MT-7810 User Manual

Page 2

8. FIX THE ANGLE AND DIRECTION OF THE DISH, REMOVE THE RF JUMPER CABLE AND SATELLITE FINDER.

RESUME CONNECTION OF SATELLITE RECEIVER TO LNB.

REMARK:

1. WHEN USING THIS UNIT WITH A “C” BAND DISH, YOU MUST NOT PLACE THE SATELLITE FINDER IN FRONT

OF DISH. DOING SO WILL RESULT IS A CONSTANT FULL-SCALE READING.

2. IF THE READ-OUT IS JUMPING OR ALWAYS FULL-SCALE, THE INPUT SENSITIVITY IS TOO HIGH. LOWER

THE SENSITIVITY BY ADJUSTING “SENS. ADJ.” ON THE SATELLITE FINDER BOTTOM. ON THE OTHER HAND,
ADJUST THE “SENS. ADJ.” CLOCKWISE TO INCREASE SENSITIVITY.

A. SATELLITE FINDER SPECIFICATION

ITEM: SPECIFICATION:

Frequency Range: 950-2400MHz
Gain: 18dB
Sensitivity: 7dB
Power Supply: DC 13-18V
Operation Ranger(Input/Output): 52-60dB
Connector: “F” Type Female
Impedance: 75 Ohm
Dimension(mm): 100 x 60 x 30

B. LENSATIC COMPASS

ITEM: SPECIFICATION:

Direction Accuracy: +/- 5
Direction Indication: 0 - 10 scale
Dimension (mm): 75 x 55 x 30

C. RF JUMPER CABLE

ITEM: SPECIFICATION

Connector: “F” Type Male X 2
Cable: RG-59/U
Length: 6ft
Frequency: 5-2150MHz
Insertion Loss: <1dB

D. BATTERY PACK

ITEM: SPECIFICATION

Battery Size: AA Type
Battery Qty: 10pcs/pack
Voltage Output: DC 15V
Connector: “F” Quick Type Male
Wire Length: 6’’
Dimension (mm): 75 x 60 x 30

E. P.V.C

CASE

ITEM: SPECIFICATION
Dimension (mm): 245 x 120 x 50