Prokit's Industries FB-1688 - Manual (Page 8)

TROUBLESHOOTING
If the cleaving problems occur, the following are possible
are causes.
Situation Solution
The fiber is placed
obliquely in cleaver. Make sure that the fiber is
placed straight in the
cleaver
The blade position is too
high. Adjust the blade height.
Dust or dirt remains on
lamp.
Clean the clamp
the c
Dust or dirt remains on
the blade.
Clean the blade.
Dust on
the fi
Remove the fiber coating or dirt remains
ber. and clean the blade fiber
again.
PROKIT’S INDUSTRIES CO., LTD.
http://www.prokits.com.tw
E-mail:[email protected]
©2013 Copyright by Prokit’s Industries Co., Ltd(C).
8