MAX Power HYD125 Hydraulic Tunnel Thruster - Manual (Page 2)

MANUAL SUPER POWER Series 125 HYD 01/05/2004
To ensure a proper installation, correct usage and long-lasting enjoyment of
this equipment, please take time to read this manual thoroughly.
Table of Contents
Number
Description Page
1 General Installation Guidlines 2
2 Tunnel 2-3
3 Propeller Drive Leg & Motor Support 3
4 The Hydraulic Motor and its Adapter 4
5 Propellers 4
6 Protection Grill 4
7 Hydraulic (General Remarks) 4-5
8 Hydraulic Specifications 5
9 Hydraulic Custom Pack 6
10 Maintenance 7
11 Spare Parts List 8
12 Spare Part Diagram 9
13 Control System Connections: Electro-Hydraulic Pump 10
14 Control System Connections: Motor with Clutched PTO 11
15 Super Power Hydraulic Diagram 12
16 Positioning and Measurements 13
17 Notes 14
18 Warranty Procedures 15-16
19 List of Distributors 17-18
20 Warranty Document (to be returned) 19
Your thruster is a high quality technical product and should be treated as such. The
employment of qualified marine personnel, with experience in bow thruster installation, is
strongly advised. Where possible, the boat manufacturer’s architects, design departments
and/or shipyards should be consulted, prior to installation taking place. For any boat
requiring official classification, bodies of approval should also be consulted at the earliest
opportunity. In any case, all other bodies, governmental or otherwise, should be contacted
to ensure conformity with legal regulations relating to the boat in question.
Your thruster should be delivered with the following parts:
Hydraulic Motor &
Coupling
Motor Support Controller HYD Drive Leg, Propeller
Pin(s) & Coupling
Propellers (2) Safety Stickers x 2 Manual
1