MAX Power CT45 Electric Tunnel Thruster - Manual (Page 2)

Manual CT35 & CT45 April 2008
www.max-power.com 1
Contents
Section Title Page
1 General installation guidelines 2
2 Tunnel 3
3 Composite motor support and drive leg 4
4 Electric Motor 5
5 Propellers 5
6 Protection grills
5
7 Electrical installation
5
8 Main power fuse
6
9 Batteries 6
10 Electronic control box 7
11 Control panel and thruster control box functions 7
12 Control panel installation 8
13 Tests 9
14 Electrical measurements 9
15 Operation
9
16 Alarms or thermal switch-off
10
17 Safety
10
18 Maintenance
10
19 Electrical installation diagram 11
20 Relay and control box connections diagram 12
21 Spare parts diagram 13
22 Spare parts list 14
23 Troubleshooting guide 15
24 Worldwide distribution network
15
25 Warranty coverage
16
26 Warranty form
18
The use of qualified marine personnel, with experience in bow thruster installation, is
strongly advised. Where possible, the boat manufacturer’s design departments, architects,
and/or shipyards should be consulted, prior to installation taking place. For any boat requiring
official classification, bodies of approval should also be consulted at the earliest opportunity.
In any case, all other bodies, governmental or otherwise, should be contacted to ensure
conformity with legal regulations relating to the boat in question.
IT IS ESSENTIAL TO READ THE FOLLOWING MANUAL CAREFULLY
BEFORE INSTALLING THE THRUSTER
NB : The thruster is delivered without accessories (fuse, fuse holder, control panel).