MAX Power CT45 Electric Tunnel Thruster - Manual (Page 18)

Manual CT35 & CT45 April 2008
www.max-power.com 17
4) Warranty Terms
If the material is used for anything other than for pleasure craft, the guarantee is limited to a
six-month period.
Year 1 -
All factory testing, diagnosis, repairs and replacements are performed at no
charge to the End User. All parts and up to two hours of labour are covered for
repairs and replacements conducted in the field.
Year 2 -
All factory testing, diagnosis, repairs and replacements are
performed at no charge to the End User. This excludes any damage or faults
occurring from normal wear and tear on the following items: engine, oil seals, relay
contacts(If warranty is registered within the 3 month period following installation)
5) Warranty
Exclusions
Damage due to modifications or installation contrary to published specifications
Cost of hauling the boat
Damage due to repairs performed by an unauthorized service centre
Damage due to lack of normal maintenance services
Damage due to water
Parts replaced due to normal wear and tear
Repairs performed without knowledge of manufacturer (please contact dealer to receive
Repair Authorization Number)
Tampering of equipment by the End User
Cost of travel to and from the job site
Cost of economic loss, including injury to any person, damage to property, loss of income or
profit, communication, lodging, inconvenience
Consequential damage due to failure, including those arising from collision with other vessels
or objects
6) Procedural
Guidelines
PLEASE VIEW THE TROUBLE SHOOTING LIST TO ASCERTAIN OR SOLVE ORIGIN OF
PROBLEM PRIOR TO CONTACTING THE DEALER/INSTALLER
1) Contact your dealer/installer to report the problem.
a. If you do not know who this is contact the nearest Max Power distributor
b. If you are in foreign waters please contact the nearest Max Power distributor
2) Ensure you have your serial number and model number to hand (top right hand
corner of warranty)
3) Dealer/Installer will come to site to decipher the cause of the fault
4) If the cause of fault is due to a manufacturing problem the dealer will contact Max
Power to receive Repair Authorization Number.
5) If the problem is due to an installation error please contact your installer.
IF POSSIBLE: PLEASE TAKE PHOTOGRAPHS OF THE THRUSTER TO SHOW
PROBLEM
The warranty as outlined above is only applicable to MaxPower manufactured
thrusters and optional equipment as used in marine pleasure industry. The supplier
holds the exclusive right to test the product and determine whether it is defective