KIA Rio_Rio5 2009 User Manual

Page 17

Knowing your vehicle

3. To enter the first digit (in this example

“2”), turn the ignition key to the ON and
ACC position twice. Perform the same
procedure for the next digits between 3
seconds and 10 seconds (for example,
for “3”, turn the ignition ON and ACC 3
times).

4. If all of the digits have been input suc-

cessfully, you have to start the engine
within 30 seconds. If you attempt to
start the engine after 30 seconds, the
engine will not start and you will have
to input your password again.

After performing the limp home proce-
dure, you have to see an authorized Kia
dealer immediately to inspect and repair
your ignition key or immobilizer system.

✽

✽ NOTICE

If you cannot start your engine in spite

of limp home procedure, have your vehi-

cle towed by an authorized Kia dealer

for inspection and necessary repairs.

✽

✽ NOTICE

The transponder in your ignition key is

an important part of the immobilizer

system. It is designed to give years of

troublefree service, however you should

avoid exposure to moisture, static elec-

tricity and rough handling.

Immobilizer system malfunction could

occur.

✽

✽ NOTICE

Do not change, alter or adjust the

immobilizer system because it could

cause the immobilizer system to mal-

function and should only be serviced by

an authorized Kia dealer.

Malfunctions caused by improper alter-

ations, adjustments or modifications to

the immobilizer system are not covered

by your vehicle manufacturer warranty.

This device complies with Industry
Canada Standard RSS-210. Operation
is subject to the following two conditions:
1. This device may not cause interfer-

ence, and

2. This device must accept any interfer-

ence, including interference that may
cause undesired operation of the
device.

WARNING

Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.