KIA Rio_Rio5 2009 User Manual

Page 13

Knowing your vehicle

Operational distance may vary depend-
ing upon the area the transmitter is used
in. For example, if the vehicle is parked
near police stations, government and
public offices, broadcasting stations, mil-
itary installations, airports, or transmit-
ting towers, etc.

This device complies with Industry
Canada Standard RSS-210. Operation
is subject to the following two conditions:
1. This device may not cause interfer-

ence, and

2. This device must accept any interfer-

ence, including interference that may
cause undesired operation of the
device.

Battery replacement

Transmitter uses a 3 volt lithium battery
which will normally last for several years.
When replacement is necessary, use the
following procedure.
1. Insert a slim tool into the slot and gen-

tly pry open the transmitter center
cover (1).

2. Replace the battery with new one.

When replacing the battery, make sure
the battery positive “+” symbol faces
up as indicated in the illustration.

3. Install the battery in the reverse order

of removal.

✽

✽ NOTICE

The keyless entry system transmitter is

designed to give you years of trouble-

free use, however it can malfunction if

exposed to moisture or static electricity.

If you are unsure how to use your trans-

mitter or replace the battery, contact an

authorized Kia dealer.

For replacement transmitters, see an
Authorized Kia Dealer for reprogram-
ming.

✽

✽ NOTICE

• Using the wrong battery can cause the

transmitter to malfunction. Be sure to

use the correct battery.

• To avoid damaging the transmitter,

don't drop it, get it wet, or expose it to

heat or sunlight.

1KMA2003

WARNING

Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.

CAUTION

An inappropriately disposed bat-
tery can be harmful to the environ-
ment and human health. Dispose
the battery according to your local
law(s) or regulation.