Sena Bluetooth Bluetooth Audio Pack v1.0 User's Guide - Manual (Page 12)

12
Factory Reset
Through the factory reset, you can restore the
factory default settings of the Bluetooth Pack.
Then all of the previous pairing information is
deleted.
1
Press and hold the Pairing Button for
10 seconds to enter the factory reset
mode. Then the LED will turn red and
you can hear the voice prompts from the
connected headset.
2
Press the Pairing Button again to reset the
Bluetooth Pack.
10 sec. Press
If you do not press the Pairing Button within
10 seconds after being entered to the factory
reset mode, the Bluetooth Pack will exit the
factory reset mode automatically.