Sena Bluetooth SM10 v1.1 User's Guide - Manual (Page 13)

English
13
The SM10 must be paired with a Bluetooth headset to stream
audio from the non-Bluetooth audio source. If you want to
stream audio to two separate headsets, you need to perform
a pairing for both headsets. Please take the following steps to
pair with your Bluetooth headsets.
5.1 Bluetooth pairing with the first headset
1. Turn on the Bluetooth headset (Refer to the headset user
guide).
2. Place the Bluetooth headset in pairing mode (Refer to the
headset user guide).
3. Turn on the SM10.
4. Press the Pairing Button for 5 seconds until the Blue LED is
rapidly flashing.
5. The SM10 will detect the Bluetooth headset nearby and
connection will be made accordingly.
6. If the first headset is connected, the Blue LED will slowly
flash.
5. PAIRING THE SM10 WITH OTHER
BLUETOOTH DEVICES