Sena Bluetooth SM10 v1.1 User's Guide - Manual (Page 10)

10
3.1 Installing on the Handle Bar
1. Attach the mounting kit on the back of the SM10 along the
guide rail.
2. Place the main unit on the handle bar, wind the rubber band
around the handle bar, and hang it on the hook.
3.2 Placing on the Mounting Cradle (optional)
1. Locate a proper surface on your motorcycle body, clean the
body surface location with a moistened towel, and allow to
dry thoroughly
2. Peel off the cover of the adhesive tape of the mounting cradle
and attach the unit on the proper surface of your motorcycle.
3. INSTALLING THE SM10