PowerWalker Inverter 1000 - Manual (Page 7)

Page 7
EN
SPECIFICATION
MODEL
PowerWalker
Inverter 1000
PowerWalker
Inverter 2000
CAPACITY 1000VA/600W 2000VA/1200W
AC INPUT
Nominal Voltage 220/230/240VAC
Input Voltage Range 90~280VAC
Nominal Frequency 50/60Hz (Auto Detection)
INPUT VOLTAGE
RANGE SELECTOR
Narrow 170~280VAC
Wide 90~280VAC
POWERWALKER
INVERTER MODE
OUTPUT
Voltage 230VAC +10/-18%
Frequency 50/60Hz ±0.5Hz
Waveform Modified Sine-wave
Efficiency (AC to AC) > 95%
Efficiency (DC to AC) > 80%
BATTERY Nominal Voltage 12V DC 24V DC
CHARGER
Charging Voltage 13.7+/-0.2V 27.4+/-0.4V
Charging Current 10A max.
Overcharging
Protection
16V+/-0.4V 32V+/-0.8V
TRANSFER Transfer Time Typical 15-20ms, 40ms max
INDICATOR
Line Mode Green LED blinks or lights steadily
Battery Mode Yellow LED lights
Overload/fault Red LED blinks or lights steadily
AUDIBLE ALARM
Low Battery Voltage
in Battery Mode
Beeps every 2 seconds
Overload Beeps every 0.5 second.
Fault Beeps continuously
ENVIRONMENT Temperature 0 ~ 40°C
PHYSICAL
Dimension (mm)
DXWXH
255x80x224
Net Weight (Kg) 2.3Kg 2.5Kg
PROTECTIONS
Deep Discharge, Overcharge, Short Circuit, Overload, Battery Short, Over
Voltage, Under Voltage.