PowerWalker VFD 600 - Manual (Page 8)

4. Specifications
MODEL
PowerWalker
VFD 400
PowerWalker
VFD 600
PowerWalker
VFD 1000
CAPACITY VA/W 400VA/200W 600VA/300W 1000VA/600W
INPUT Voltage 110/120VAC or 220/230/240VAC
Voltage Range 90‐145VAC / 170‐280VAC
OUTPUT Voltage 110/120VAC or 220/230/240VAC
Voltage Regulation(Batt.
Mode)
±10%
Frequency 50Hz or 60Hz
Frequency Regulation (Batt.
Mode)
+/‐1 Hz
Output Waveform Modified Sinewave
BATTERY Battery Type & Number 12V/4.5Ah x 1pc 12V/7Ah x 1pc 12V/7.2AH*2
Back up Time (at a PC load
with 15" monitor)
5 minutes 8 minutes 30 minutes
Recharge Time 10 hours to 90% after complete discharge
TRANSFER TIME Typical 2‐6ms
AC Mode Green LED lighting
Battery Mode Green LED flashing every 4 seconds
Low Battery at Battery Mode Green LED flashing every second
Fault Red LED lighting
Battery Weak at AC Mode Red LED flashing every 2 seconds for 30 seconds
INDICATOR
Battery Fault at AC Mode Red LED flashing three times every 2 seconds
Battery Mode Sounding every 4 seconds
Low Battery at Battery Mode Sounding every second
Fault Continuously sounding
Battery Weak at AC Mode Sounding every 2 seconds for 30 seconds
AUDIBLE ALARM
Battery Fault at AC Mode Sounding three times every 2 seconds
PROTECTION Full Protection Discharge, overcharge, and overload protection
Dimension, DXWXH (mm) 231x81x185 312x94x250 PHYSICAL
Net Weight (kgs) 3.1 3.8 6.7
Operating Environment 0‐ 40°C, 0‐90 % relative humidity (non‐condensing) ENVIRONMENT
Noise Level Less than 40dB
EN