BabyTrend CC13700 - EZ FLEX-LOC INFANT CAR SEAT - POMEGRANATE - Manual (Page 14)

Crotch Strap
The crotch strap is adjustable in length to ensure a safe and
comfortable fit for harness.
Seat Angle Indicator
The Seat Angle Indicator
is used to ensure that the
seat is installed at the
proper degree of recline to
adequately protect your child
in a crash.
Locking Clip
The Locking Clip is stored under the pad
on the right side of the Infant Seat and
is used to securely install the Infant Seat
with certain types of vehicle lap/shoulder
combination belts.
Seat Angle Adjuster
The Seat Angle Adjuster raises and
lowers the rear of the Base in order to
obtain the proper angle of recline for
proper installation of the Infant Seat
when using the Base.
27 26
5.0
FEATURES
5.0
FEATURES
Seat Angle Indicator
Locking Clip
Seat Angle Adjuster
5.7 Operation of the Carry Handle
The Carry Handle has four positions: the carry position, a mid-
storage position, a storage position and the non-rocking position.
• Depress the two buttons located on the
handle just above the connection to the Car
Seat shell to release the handle.
• Slowly rotate the handle to the desired
position. The buttons should pop out and
the handle should automatically lock into the
new position. (Fig. 27-1)
• Before lifting the Car Seat, push on the
handle to check that both sides of the handle
have locked into the Carry position.
• Use the Storage or Non-Rocking position
when the Car seat in the vehicle.
INCORRECT
CORRECT
9 kg (20 lbs / livres)�
and under / et moins
9-10 kg (20 - 22 lbs / livres)
Carry Mid-Storage Storage
Non-Rocking
Fig. 27-1