BabyTrend LB10055 - HYBRID NO BACK BOOSTER CAR SEAT - HELLO KITTY - Manual (Page 9)

15 16
7.0
Booster Seat
Installation and Use
1. Place the Booster Seat on the vehicle seat in a
seating location equiped with a vehicle
Lap/Shoulder belt and centered between
the Lap/Shoulder belt anchorages (see
“Selecting a Vehicle Seating Locations” section).
2. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner’s manual
for use with a car seat.
3. Place child in Booster Car Seat
with child’s back and rump contacting
seating surfaces.
4. Pull the vehicle lap/shoulder belt across front
of child and buckle vehicle seat belt.
- Vehicle shoulder belt on buckle
side must be under armrest.
DEATH or SERIOUS INJURY can occur:
• If child will not keep vehicle shoulder belt properly positioned
on shoulder, DO NOT use this Booster Seat. Use a
different child restraint system.
• Do not allow child to slide down in Booster Seat which could
position vehicle lap belt across child’s abdomen and shoulder
belt over neck or face.
• Discontinue use of the Backless Booster Car Seat when the
top of the child’s ears are above top of the vehicle seat back
or vehicle headrest.
• Securely belt this Booster Seat in vehicle, even when not
occupied. An unsecured car seat can injure other occupants
in a crash.
• DO NOT use accessories or parts other than those provided
by Baby Trend, Inc. Use of accessories or parts from other
manufacturers could alter the performance and safety of the
Booster Seat.
7.0
Booster Seat
Installation and Use
WARNING!
7.1 Booster Seat Installation and Use
WARNING!
• Do not place the Booster Seat in
a seating position that has only a
vehicle lap belt.