BabyTrend LB10055 - HYBRID NO BACK BOOSTER CAR SEAT - HELLO KITTY - Manual (Page 14)

25 26
9.2 Use and Adjustment of Shoulder Belt Positioner
Use the Shoulder Belt Guide Clip to center the
vehicle shoulder belt on the child’s shoulder.
Shoulder belt MUST be centered on child’s
shoulder as shown.
- Insert the vehicle shoulder belt into both sides
of the Shoulder Belt Guide.
- Pull the free end of the strap down to tighten
the clip against the child’s shoulder and bring
the shoulder belt into the proper position.
9.0
Operation and Adjustments
10.1 Certifications
This Booster Seat conforms to all Federal Motor Vehicle Safety
Standards for use in motor vehicles. See use below:
This restraint is NOT certified for use in aircraft.
11.0 Cleaning and Maintenance
The hard surfaces of the Booster Seat (plastic components), may
be cleaned by wiping with a solution of water with mild soap. DO
NOT use bleach as it may weaken plastic components. Dry all
surfaces with a clean towel.
Care and Cleaning Seat,
For Seat Pad:
• For care and maintenance, read and follow instructions on
fabric tags.
To Remove Seat Base Pad:
• Unhook elastic on rear corner of
pad from plastic pin. Repeat on
opposite side.
• Slide the seat base pad armrest
covers forward and off armrests.
Slide entire seat pad forward,
pulling elastic bands off from under
cup holders and off the front of the
Car Seat.
10.0
Additional Information
Elastic