BabyTrend SS73443 - SIT N' STAND LX STROLLER - COLUMBIA User Manual

Page 5

1. Have child sit on the jump seat facing backwards. Secure the seat belt,

which is attached to the back of the seat, around the childʼs waist, and

buckle to the crotch strap. Fig. 11.

2. Adjust the seat belt to be snug around the childʼs waist.

3. To release, apply pressure to both sides of the male clip until the clip

is released. This process requires a moderate amount of effort so as to

prevent an accidental release by your child.

4. Be sure that the childʼs feet are fully on the platform at all times.

SEATBACK POSITIONING

1. The front seat has a two position recline. To recline the seat, rotate the

recline bar and press backward on the seat back. Fig. 12. To place the

seat in the upright position, press upward on the seat back while rotating

the recline bar.

2. The upright position should be used only for a child that is at least 6

months old. Note: Seat does not fully recline.

Fig. 11.

Fig. 12.

TO USE JUMP SEAT