Dual Electronics XDM6400 - Manual (Page 6)

6
With the unit on, press and hold DISP until the clock begins to
flash, then release. Press TUNE
nn
to adjust the hours and
TUNE ll to adjust the minutes. Press DISP momentarily to
save the selected time.
The clock will display 1-hour AM/PM time in USA frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 4-hour time (:00).
Press and hold the rotary encoder for more than seconds to
access the setup menu. Press the rotary encoder momentarily
to select between the menu functions and rotate the rotary
encoder left/right to adjust or activate the desired function.
Set the Clock
12/24-hour Clock
Setup Menu
XDM6400 OPERATION
General Operation
Setup Menu
Menu Function Options Action
Loudness Curve LOUD OFF Disables the loudness function.
LOUD ON Enables the loudness function. Activating this feature
will enhance the bass and treble frequencies when
listening to music at low volumes.
Tuner Frequency
Spacing FREQ USA Programs the unit to USA tuner spacing.
(00kHz for FM and 10kHz for AM)
FREQ EUR Programs the unit to European tuner spacing.
(50kHz for FM and 9kHz for AM)
Clock Display CLK OFF Programs the unit to not display the clock when the
power is off.
CLK ON Programs the unit to display the clock when the power
is off.
Auxiliary Input AUX ON Enables the front panel .5mm auxiliary input.
AUX OFF Disables the auxiliary input.
Beep
Confirmation BEEP OFF Disables the confirmation beep.
BEEP ON Enables the confirmation beep.
Local/Distance
Tuning LOC OFF Activates distance tuning.
LOC ON Activates local tuning for strong station reception only.
Power on
Message MSG OFF Disables power on message.
MSG ON Enables power on message to be displayed.
Demonstration
Mode DEMO ON Enables the "BT READY" message.
DEMO OFF Disables the demonstration mode.