Dual Electronics AMB600W - Manual (Page 30)

30
AMB600W OPERATION
Bluetooth
®
Operation
Making a Phone Call
• Press once. "Enter Phone Number" will be shown, then
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press on the remote control or
AMB600W front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the AMB600W.
• Press SELECT from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the AMB600W.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or to dial the phone number.
To redial the last phone number, press two times from
Bluetooth mode. Dialing will begin automatically.
Manual Dialing
Recent Calls List
Redialing the last number
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the AMB600W. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press to receive the incoming phone call.
• Press to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press to end a phone call.
If the phone call was received when listening to music in
another mode, the AMB600W will resume the previous
mode.
Receiving a Phone Call
Ending a Phone Call