Dual Electronics MXDMA80 - Manual (Page 7)

7
Press rotary encoder momentarily to select between
Volume (default), Bass, Treble, Balance, Fader & Subwoofer.
Press rotary encoder until BAS appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until TRE appears then rotate encoder
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until BAL appears then rotate encoder
left/right to adjust (BAL L 12-BAL 00-BAL R 12).
BAL 00 represents equal balance
Press rotary encoder until FAD appears then rotate encoder
left/right to adjust (FAD F 12-FAD 00-FAD R 12).
FAD 00 represents equal fader
Press AUDIO until SUB appears then rotate encoder
left/right to adjust ( SUB 00 - SUB 12 ).
Note: In setup menu, must show: SB-W ON
Individual Bass and Treble settings are retained in memory
for AM, FM, CD, AUX and WB modes. This allows you to
save the Bass and Treble settings separately for each mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
Press RESET upon initial installation or if abnormal
operation occurs. The reset button is located behind the
faceplate.
Audio
Bass
Treble
Balance
Fader
Subwoofer
Source Audio Memory
Reset
MXDMA80 OPERATION
General Operation
BASS VOLUME TREBLE BALANCE FADER SUBWOOFER