Dual Electronics MXDMA80 - Manual (Page 5)

5
The front panel is semi-permanently attached during
assembly. Please refer to the separate yellow instructions
(before installation) to make the front panel removable.
With the unit off, press EJECT to allow the front panel to slide
down. Gently squeeze the release tab located on the bottom
center underside and pull front panel down and away from
unit to remove. To install, insert left side first, then push right
side to secure.
Press PWR for 2 seconds or any other button momentarily
to turn the unit on. Inserting a disc will turn the unit on
automatically. Press PWR for 2 seconds to turn the unit off.
Press MODE to select between tuner, weatherband and
auxiliary input. Modes of operation are indicated in the
display.
Adjust volume using rotary encoder (00-46).
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
When in AM/FM, CD, WB or AUX mode:
Press DISP to select between clock and radio frequency
(tuner mode), clock and CD elapsed time/track (CD mode),
clock and WB frequency mode or clock and AUX (AUX mode).
Press DISP to select between channel name, artist name,
song title or clock.
With the unit on, press and hold DISP until the clock begins to
flash, then release. Press TUNE
nn to adjust the hours and
TUNE ll to adjust the minutes. Press DISP momentarily to
save the selected time.
Front Panel Note:
Front Panel Removal
Power On/Off
Mode
Volume
Preset EQ Curves
Display
Set the Clock
MXDMA80 OPERATION
General Operation